Straightening single phase motor voltage supplier made in China – replacement parts – in Rotterdam Netherlands Centralized Positioning Continual Cut to Length Machine Line with top quality

We – EPG Group the biggest worm gearbox, couplings and gears manufacturing facility in China with 5 diverse branches. For far more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

High-Speed STAINLESS Metal SLITTING Equipment LINE

Specification
&
Parameter
                    
 

 

• :Coil primary specification

1. Coil substance: Stainless steel.
2. Coil thickness:.3~3.0mm..
3. Coil width:300~1500mm.
4. Coil I.D.:Φ508mm.Φ610mm(With Include).
5. Coil O.D. (max) :≤Φ1800mm.
6. Coil bodyweight (max):≤20T.
7. () Line total spot (about):28M×9M.
8. :.Feed-in path:From correct to left.

• Gear composition:

Paper device-Hydraulic Uncoiler Vehicle-Hydraulic Uncoiler- Hydraulic bracket-Feeding guidebook plate-,Pinch roller with Coil head chopping machine-Front looping table-)()Side guiding (laminating device)-Disc shear-Curling device-Back looping table-Rigidity table-Coil divided shearing equipment-Recoiler-Hydraulic bracket-Hydraulic recoiler Car-Hydraulic Station System-Electrical Handle Program,Pneumatic Program

• :Slitter main specification

Operation function: use for collecting packing paper in coil.When need collection paper, put paper tube and turn over several circle.
Framework : double saddle steel welded .Managed by torque motor.

1. Hydraulic Uncoiler Car

1. ).Structure:Steel welded.
2. :Type:Driven by 4 wheels.
3. :.Transmission electrical power:Gear lowered motor.
4. :.Lifting power:Hydraulic oil cylinder.
5. :20T.Max loading excess weight:20T

1. :Hydraulic decoiler

1. ,,,,37KW.Form by bracket,guide seat,hydraulic increasing axis ,hydraulic oil cylinder ,37KW D.C. motor and so on.
2. :4.,.Axis framework: form by 4 parts of wedge slider.Reel is hydraulic driven and expands coil.
3. ,,..Decoiler has DC motor so that it could decoil with pinching machine, and steer clear of spreading simply because of rotated inertia. Decoiler employs pneumatic disc kind brake to operate with comply with-up machine line pace and have quickly brake when outage.
4. ,,,..Decoiler has fixed urgent fitting, urgent wheel  has PU notch so that convenient to pull out pac ept band and decoil.Pressing wheel is managed by oil cylinder to carry.
5. Expanding selection:Φ470mm~Φ530mm.

1. Hydraulic bracket:
   1. :.Construction:steel welded.
   2. :.Bracket energy:Hydraulic cylinder.
2. Feeding information plate:

1. .Kind by flexible feeding guidebook plate with driving cylinder.
2. ,.,.,.Help decoiling and sending substance so the head of coil could enter into pinching equipment.Xihu (West Lake) Dis. plate extends and lifts to a ideal spot,guiding head of coil. Plate lifting, stretching is driven by oil cylinder.

1. ,:Pinch roller with Coil head cutting equipment

1. : ,.Framework and kind:Pair roller pinching, steel welded.
2. pair rollers measurement:Ø250mm×1600mm,2pcs. Roller surface with PU.
3. :.urgent kind:driven by hydraulic oil cylinder
4. :37KW,.Driving power:37KW D.C. motor,and equipment box.
5. :,,,,,.Construction: form by wallboard,higher and down tool apron and blade,gap modifying mechanism,synchronous shaft,synchronous equipment,hydraulic oil cylinder and so on.

1. :Entrance looping table
   1. :..Kind:steel plate welded with channel.Oil cylinder controls platform higher and down.
2. :Facet Xihu (West Lake) Dis.(laminating gadget)

1. :,,,.Structure:sort by vertical guiding roller,slider,width changing mechanism,pinch roller and transmission system.
2. :Φ70×170mm,6,,.Vertical roller dimensions:Φ70×170mm,6 items,area quenching,chrome-plate.
3. Pinch roller dimensions:Φ180×1600mm. Roller surface with PU.
4. :.Pinch roller lifting electrical power:Hydraulic oil cylinder.
5. :.Pinch roller energy:Gar reduced motor
6. :.Deviation-rectify adjustment:Solitary facet manual altering with two rods.
7. :300~1500mm.Adjusting assortment:300~1500mm
8. ,.

Masking membrane to coil according to ask for, complete by two-pinching rollers pressing when covering

1. ,.

Laminating fitting is use special unfolded roller with pinching rollers. It could enable membrane go over on steel plate uniformly.

1. Disc shear:

1. Composition and sort:form by arch,upper arbor lifting worm wheel box,equipment decreased motor ,common coupling,device foundation,energy equipment box and so on.
2. :Φ220×1600mm().Shearing axis size:Φ220×1600mm(blade set up spot).
3. :42CrMo,.Shearing axis content:42CrMo,intermediate frequency quenching.
4. :90kw.Shearing energy:90kw DC motor.
5. :.Shearing urgent power:Equipment lowered motor.
6. :.Blade shifting variety:Hydraulic oil cylinder thrust back arch.
7. :~150m/min.Shearing velocity:~150m/min adjustable.
8. :Φ220×Φ350×10mm.Blade size:Φ220×Φ350×10mm,10pcs.
9. Blade shim measurement:Φ220×Φ260mm.
10. :<1mm  25 ,3mm 5.

       Slitting strip amount: <1mm 25PCS, 3mm 5PCS.

1. :Curling machine:

1. :.,,,,.Type:rotating disc variety.Kind by motor,helical worm geared reducer,rotating disc,foundation and so onInfinitive velocity to make very same with disc shear.
2. Curling pace:~150mm/min.
3. Recoil disc measurement:Φ365×600mm.
4. :3-10mm.Edge wire width:3-10mm single side.
5. :.Recoil disc electricity:AC Motor with helical worm geared reducer.
6. :.Materials elimination variety:Oil cylinder thrust recoil disc contraction.

1. :Back looping desk:

1. :..Kind:steel plate welded with channel.Managed by oil cylinder to carry.

1. :Pressure desk

1. :,,.Perform:entrance separator separates the coil in recoiler in progress,at the same time coil carry back pressure,so that it is convenient to recoil tight.
2. :,,,,.Structure:Kind by arch, higher and down rigidity plate, synchronous shaft, oil cylinder, base and so on.
3. Pre-feeding axis size:Φ100×1700mm.
4. :Φ200×3mm,65Mn,.Pre-feeding slice measurement and content:Φ200×3mm,65Mn, quenching treatment method.
5. :,.Tension Managing:Oil cylinder pressing sort rigidity fitting, push by means of hydraulic decompressed valve.

1. Coil divided shearing equipment:

1. :.,.,,,.

Purpose: shearing coil to reach dividing function according to need. When it reaches the length of strips, manual operation button controls shearing and driving cylinder to cut coil. After divided shearing, it has device of speed and length measurement, offers signal to control machine line speed, and show on the screen of controlling table, provide a basis for dividing coils.

1. :,,,,,,.
   Coil divided shearing structure: hydraulic upper shearing type. form by wallboard,upper and down tool apron and blade,gap adjusting mechanism,synchronous shaft,synchronous gear,hydraulic oil cylinder and so on.
2. :Ø400×1700mm,.Balanced measuring roller dimension:Ø400×1700mm,chromeplate .

1. :Recoiler

1. :,,,..,..Operate:separate the slitted coil and recoil,reel use DC altered motor to travel rotating.Clamping block is hydraulic growing composition.Hydraulic cantilever kind coil separator could enlarge when rise ,could press tightly all the time.Have pneumatic rapidly-brake fitting.
2. ::,,,.Composition:cantilever type coil separator: kind by cantilever, separator slice, separator distance sleeve and separator axis.Oil cylinder delivers electricity to lift.
   1. :,.Coil rolling machine:sort by motor,diminished box and reel.
   2. Rolling I.D.:Φ508mm.
   3. :20T(MAX).Rolling bodyweight:20T (MAX).
   4. :.Rolling sort:Upper-rolling.
   5. :.Clamping block:Oil cylinder increasing fitting.
   6. :144KW.Driving power:144KW DC motor.
3. :~150m/min.Rolling velocity:~150m/min adjustable.
4. :.

Pushing material fitting: drive by hydraulic cylinder and two assistant pushing rods.

1. :Hydraulic recoiler Vehicle

1. :.Structure:Steel plate welded with channel.

 

1. :.Transmission energy:Equipment reduced motor.
2. :.Lifting energy:Hydraulic oil cylinder.
3. : 20T.Max loading bodyweight:20T.

1. :Hydraulic bracket

1. :.Composition:Steel welded.
2. :. Bracket electrical power:Hydraulic cylinder.

1. Hydraulic Station Program
   1. :,,.Summary:Hydraulic method is formed by hydraulic station and relevant pump,valve,pipes.
   2. :Specification
      1. Stress:10Mpa
      2. Circulation/:27L/min
      3. :N46

Wor ept medium:N46 Antiwear hydraulic oil.

1. 1. 1. Gasoline tank capacity:500L
      2. Motor:7.5KW
2. Air pressure technique:

1. :,,,.

   Summary:Form by air supple, air supple factor, magnetic valve, and related pipes, cylinder

1. Specification/           

air pressure/        .6~.8Mpa
              Air-feeding quantity             1/min()
one cube/min (underneath compressing condition)
             

1. :Electrical Control Technique/

       ,,320KW:380V,50Hz.
A single set of Electrical cupboard,two sets of procedure cabinet,equipment installing potential 320KWpower supple:380V,50Hz.
 

No.	Identify	Area of origin
1	PLC	ZheJiang Delta:DVP-(32EH)
2	() Man-machine interface(touch monitor)	KunLun TongTai
3	Encoder	HAIDE ZSF6.215-102CW-1571BZ3K24F
4	DC controller	England Eurotherm:590C
five	Electric aspect	Schneider

 

six	DC velocity governing motor	Pioneer motor
seven	Equipment Reducer Motor	ZheJiang Tunglee
eight	Key component bearing	HangZhou bearing,HangZhou bearing,HangZhou bearing
nine	equipment box seal	ZheJiang Speedy International Firm
10	Hydraulic technique aspect	ZheJiang Hydraulic Factory

 

1. Purchaser getting ready/

1. .Electricity grasp swap/
2. ,.Oil of equipment box and hydraulic stress/
3. . Air supple

Primary Xihu (West Lake) Dis.llary Items Making Organization

1. Producing shop/Xng sn xut

1. 28.

Creating line length is about 28 meter.

1. :34()×10()×6().

Manufacturing store spot must be minimal: 34M (L)*10M (W)*6M (H)

1. twenty.

You must have a single established of crane which could load more than 20T and other corollary equipments in producing shop.

/ The use of authentic equipment manufacturer’s (OEM) component figures or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our company and the shown replacement elements contained herein are not sponsored, authorized, or made by the OEM. /