We – EPG Group the most significant Chain and agricultural gearbox manufacturing facility in China with 5 diverse branches. For more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
EPG has been efficiently licensed by ISO9002 Top quality Administration Method, ISO9001 Good quality Administration Method, API certificate, ISO/TS16949:2002 and ISO10012 measurement management program. ISO Hangzhou EPG Co.,Ltd. , was started in November, 1997. With its five wholly owned subsidiaries.9001, ISO/TS 16949 and AS9100 certified. Manufacturer of common and custom roller chains for use in a broad variety of apps. Roller chains are available in solitary-pitch, double-pitch and precision versions. Meets or exceed ANSI requirements. Our big inventory amounts on zinc plated, solid steel shaft collars assure prompt pleasure of any measurement necessity. Unplated, black-oxide and stainless metal sound collars are conveniently obtainable. Black-oxide metal clamp variety collars are in the same way stocked for unbeatable support. Mounted bearing and linear bearing orders are frequently delivered within 24 hours and our turn-close to time on lower-to-length linear shafting will exceed your expectations.
Cardan Chain
The cardan chain is produced up of a chain and a cardan which permits the chain to rotate in 360 levels. This design helps make it an optimum conveyor chain solution for overhead trolley conveyors.
Supported by specialised bearings in the two horizontal and vertical planes, the product delivers clean and secure working on either crossed or round design tracks.
An further plate is attached on the cardan chain, and the plate can be made into diverse forms according to the personal software requires.
The chain factors are created of medium carbon metal and are warmth dealt with to improve surface area overall performance. As for these chains to be utilized in corrosive environment, blackening remedy is performed so as to achieve corrosion resistance.
| Chain No. | Pitch P (mm) | Interior width of interior website link b1 (mm) | Diameter of roller d1 (mm) | Diameter of pin d2 (mm) | Size of pin L (mm) | Height of sidebar h2 (mm) | Thickness of sidebar T (mm) | Gap length of connected plate L1 (mm) | Gap diameter of connected plate d4 (mm) | Gap distance of articulated block F (mm) | Tensile strength Q (KN) |
| SJ400-40 | 200 | 20 | thirty | nine | sixty five | 20 | three | 88 | 6.forty four | twenty | 15 |
| SJ400-sixty | 200 | 21 | 35 | 10 | sixty four.5 | twenty | 4 | 88 | 6.5 | twenty | sixty |
| SJ400-a hundred | two hundred | 26 | forty | 14 | 75 | 30 | 4 | 88 | ten | 25 | 100 |
| SJ405S-60 | 203.2 | 30 | forty seven | 14 | 95 | 30 | four | seventy six.2 | eight.4 | 16.five | fifty |
Associated Names
| Pitch P (mm) | Inner width of inner url b1 (mm) | Diameter of roller d1 (mm) | Diameter of pin d2 (mm) | Duration of pin L (mm) | Peak of sidebar h2 (mm) | Thickness of sidebar T (mm) | Hole distance of hooked up plate L1 (mm) | Hole distance of articulated block F (mm) | Tensile power Q (KN) |
| one hundred ninety.five | 26 | 38 | 13 | 105 | 28 | 4.5 | sixty | 23.2 | ninety eight |
| 203.2 | 26 | 38 | 13 | one zero five | 28 | four.5 | sixty | 23.two | ninety eight |
For far more than twenty a long time, we have centered on custom chains.
For much more than 20 many years, We have done hundreds of distinct types of industrial chains.
So we have a wealth of custom made chain encounter.
Here are some of the versions of the chains.
Why Decide on DCC?
1. EPT chain transmission manufacturing co.,Ltd is a specialist manufacture of chains,and is the member unit of China Countrywide complex committee for stHangZhourdization for china transmission,
2.we occupied an region over a hundred thousand sqm,owned stHangZhourd workshops in excess of thirty 1000’s sqm and in excess of 300sets of specialist equipments to make chains in large-scale as properly as total inspection and te EPT gadgets.
3.we passed by means of the authentications of ISO9001:2000 global quality program and ISO14001 environmental administration method .
four,we have 75% of goods which are exported to Europe,The us,Japan , Southea EPT Asia ,and so on,
five.twelve years factory encounter, Nearly all the areas are made by our own factory,therefor we can control the co EPT and good quality.
Pick DCC,you choosed Higher top quality , competitive value,excellent support,
wish we will encourage enterprise as effectively as friendship!
The use of authentic gear manufacturer’s (OEM) component quantities or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our organization and the detailed alternative components contained herein are not sponsored, accredited, or manufactured by the OEM.
